NeTracker offers an integrated tool to fully verify, monitor, and troubleshoot the signalling and services deployed over
traditional and next generation networks. NeTracker's rich feature set makes it the ideal tool during
all network phases.
Call generation, protocol analysis, and QoS measurements are critical during the installation and
maintenance of PBXs, softswitches, signalling and media gateways as well as the traditional PSTN switches.
NeTracker is also used by service providers and operators during the network planning, implementation, and deployment phases.
NeTracker is manufactured as four models:
• NeTracker 1000 (portable
solution)
• NeTracker 3000 (rack mounted solution)
• NeTracker 4000 (rack mounted solution for probe applications)
• NeTracker 600 (high performance rack mounted solution for probe applications
or traffic generation)
MAIN
FEATURES
Multi-tests: up to 3 tests can run simultaneously.
Multi-protocol & Multi-interface: up to 8 different protocol
stacks can be configured and run per test (even with different physical
interfaces).
Multi-user: up to 8 users
can access the unit to configure tests and access results without
interfering with each other.
Multi-interface correlation: correlation
of different protocols (across multiple interfaces) provides a unified
view of the entire call using ladder diagrams, regardless of the different technologies
involved.
Architecture: the Client/Server architecture is based on CORBA with
HTML and Java interfaces.
GUI Client: users can access the unit via
a Sunrise GUI client which works on multiple platforms including MSWindows
(all), MAC-OS and OS-X, AIX, SUN Solaris, Linux, HP-UX and any Unix Platform.
The client can be downloaded from the NeTracker server through a browser.
Data
Capture: 100% real-time protocol traffic can be captured and stored in a
100 Mbyte RAM or 2 Gbyte virtual buffer during each test.
Data Recording: data
can be recorded in Binary Format and stored on hard disk
|
| |
|
| |
SUPPORTED
MONITORING PROTOCOLS
WAP:
• WSP and WTP decoding
VoIP:
• H.323 (H.225, H.235, H.245, H.450)
• SIP and SIP-T
• MGCP, Aspen-MGCP (Nortel) and NCS
• MeGaCo/H.248, GCP
• RTP/RTCP
• T.38 (Fax over IP)
SS7:
• ITU-T (MTP, SNM, SNT, TUP, ISUP, SCCP, TCAP)
• ANSI (MTP, SNM, SNT, ISUP, SCCP, TCAP, AIN)
• BTNR-167
• CHINA SS#7 (TUP, ISUP)
• Japan TTC
• Local Number Portability
• ETSI INAP (CS1/CS2) and INAP+
• HSL SS7 Version (on 31 aggr. TS)
• SS7 over MTP3-Broadband
CDMA one/CDMA 2000:
• IS41-C,D,E and IS-637
• A1 (A reference point)
• A3 (Ater reference point)
• A11 (Aquater reference point)
IMS (IP Multimedia Subsystem)
• SIP Mobile (Mm, Mr, Mw, Mg,Mi ISC)
• Diameter (Cx, Dx, Gq, Wb, Wg, Wr, Wx)
• COPS (Go)
Sigtran:
• SCTP, M2PA, M3UA, SUA
|
SUPPORTED
PROTOCOLS FOR SIMULATION
Video over IP
• H.261, H.263, H.263+, H.264, MPEG 2, MPEG 4
• QoS metric (PSNR)
VoIP:
• H.323 Bulk Call Generator
• SIP Script language for message building
• SIP Bulk Call Generator
• MGCP Script language for message building
• RTP Traffic Generator with Service Script
Sigtran:
• SCTP, M2PA, ISUP
SS#7:
• ITU-T/ANSI ISUP Call Generator including traffic
generation over Bearer Channels
ISDN:
• ETSI/Bellcore N2 including traffic generation over Bearer
Channels
Analog:
• 2 Wires FXO Subscriber Simulator
SERVICE QUALITY ANALYSIS & TESTING
• Intrusive QoS audio testing with PESQ evaluation and
MOS scores correlation
• Non-intrusive audio testing with E-model/VQmon (ITU-T
G.107), ITU P.561, ITU P563 and non-intrusive video
testing with EPSNR
• Real time monitoring with QoS indicators
• Scripting capabilities for VoIP MGCP & VoIP SIP
environments
• Scripting capabilities for testing the services:
- Audio (G711)
- Video (H263/Mpeg4/3GPP)
- Tones (DTMF) |
| |
|
|
|
